Skip to content
Blueville Capital
← Market insights

SPX Expected Move Today: A Calculator You Can Use Daily

Trading Education ·

A price chart opening into a green cone of likely prices marked 68%, beside a calculator, a call-plus-put badge and an ATM straddle button

SPX’s expected move today is the range the options market is pricing for the rest of the session, usually stated as one standard deviation either side of the current index level. You can calculate it in a couple of minutes from the same-day at-the-money straddle, or from the Cboe 1-Day Volatility Index (VIX1D). It describes how far SPX might travel, not which way.

This page is a worksheet you can run each morning: two ways to get the number, a worked example, a table for re-marking the range as the day goes on, and the mistakes that make the number wrong.

What the Expected Move Measures

Option prices carry the market’s estimate of future volatility. The expected move turns that estimate into points on your chart: an upper line and a lower line around the current SPX level. For background on where that estimate comes from, see Implied Volatility in Options: What Index Traders Must Know.

Why one standard deviation

If daily moves followed a normal distribution, about 68% of sessions would end inside a one-standard-deviation band and about 95% inside two. That is where the common “68%” comes from. Real index returns don’t follow the bell curve exactly: large moves happen more often than it implies, and implied volatility can come in above or below what the market then does. Treat 68% as a rough guide, not a measured hit rate.

What it doesn’t tell you

The expected move has no direction. A 60-point range says nothing about whether SPX will rise or fall, and nothing about the path in between. A session can touch both lines and close in the middle.

The Daily Calculator: Two Ways to Get the Number

Both methods use same-day SPX options. SPX options are cash-settled and European-style, and Cboe lists daily expirations alongside the weekly and standard ones, so there is a contract that expires today. Use that one. A weekly or monthly option includes days beyond today and will overstate today’s range.

Method 1: the at-the-money straddle

  1. Note the SPX level and the strike closest to it.
  2. Take the midpoint price (halfway between bid and ask) of that strike’s same-day call and put, and add them. That sum is the straddle.
  3. Divide the straddle by 0.8. The result is roughly a one-standard-deviation move in points.
  4. Add it to and subtract it from the SPX level. Those are your two lines.

Why 0.8: in standard option-pricing math, an at-the-money straddle is worth close to the average size of the move, and for a normal distribution the average move is about 0.8 of one standard deviation (the square root of 2 divided by pi, about 0.798). So the straddle alone is a slightly narrower range than one standard deviation. Shortcuts of this kind go back at least to Brenner and Subrahmanyam’s 1988 paper, A Simple Formula to Compute the Implied Standard Deviation. Some traders use the raw straddle as their range. That’s fine, as long as you know which one you’re using.

Method 2: VIX1D

VIX1D estimates expected volatility for a single day from the prices of P.M.-settled SPX options expiring today and next. Like the VIX, it’s an annualized percentage. Cboe’s VIX1D methodology counts time in regular-session business minutes: 102,060 in a year (252 days × 6.75 hours × 60). To convert a VIX1D reading into points:

  1. Divide VIX1D by 100.
  2. Multiply by the SPX level.
  3. Multiply by the square root of (minutes left until the 4:00 p.m. ET close ÷ 102,060).

For a full session, that last factor is the same as dividing by the square root of 252, about 15.9. That’s why some traders divide the VIX1D level by 16 for a quick read.

A worked example

The numbers below are hypothetical, chosen to show the arithmetic. They are not market data for any day.

Input Method 1: straddle Method 2: VIX1D
Time and SPX level 9:45 a.m. ET, 6,800.00 9:45 a.m. ET, 6,800.00
Market input 6,800 call 25.80 + put 25.60 = 51.40 VIX1D 15.6
Conversion 51.40 ÷ 0.8 = 64.3 points 0.156 × 6,800 × √(375 ÷ 102,060) = 64.3 points
Range 6,735.7 to 6,864.3 6,735.7 to 6,864.3

In practice the two methods rarely match to the point. The straddle reflects one strike, while VIX1D uses a wide range of strikes. If they disagree by a lot, check that both are using today’s expiration and current quotes.

Re-Marking the Range During the Session

The morning range covers the whole session. As time passes, less of the day is left to move, so the remaining range shrinks with the square root of the time remaining. If the range at the 9:30 open were 64 points, a market with steady volatility would leave roughly:

Time (ET) Minutes left to 4:00 Share of the opening range Remaining range
9:30 390 100% 64 points
11:00 300 88% 56 points
12:30 210 73% 47 points
2:00 120 55% 36 points
3:00 60 39% 25 points

The table assumes volatility is spread evenly through the day. It usually isn’t: the open, the close and scheduled releases carry more movement, and implied volatility changes as news arrives. So the table is a sanity check, not a replacement for re-pulling the live straddle. Around midday, take a fresh straddle price, re-centre the range on the current SPX level and redraw both lines.

One VIX1D detail matters late in the day. Cboe’s methodology holds the current-day value fixed once fewer than 60 business minutes remain, at about 3:00 p.m. ET, so use the straddle for the last hour. For more on how the session’s hours differ, see Market Hours Strategy: When to Trade SPX Options.

Event Days: CPI, FOMC and Earnings

When a scheduled event falls inside the session, the same-day options price it in, and the expected move widens. You don’t need to adjust the formula. You need to make sure your inputs are current.

  • Releases before the open, like CPI and the jobs report at 8:30 a.m. ET, have already happened by 9:30. The morning straddle prices what’s left of the day, which can be calmer than the release itself. How CPI and Jobs Reports Move ES and NQ Futures covers the pre-market side.
  • FOMC days put the decision at 2:00 p.m. ET, inside the session. The range stays wider all day, and the time-of-day table above won’t hold. See How to Trade SPX Options Around FOMC Announcements.
  • Big-tech earnings usually come after the close, so they show up in the next day’s range rather than today’s.

How Traders Use the Range

The expected move is context, not a trade. Traders use it in a few common ways:

  • Strike distance. A strike inside the range is one the market prices as reasonably likely to be reached today; a strike outside it, less likely. That helps when comparing structures such as those in Iron Condor vs. Iron Butterfly and Straddle vs. Strangle Options.
  • Sizing. A wide range means a stop placed the same distance away is hit more easily. Some traders cut size on wide-range days rather than widen their stop. How to Manage Risk in Options Trading covers the mechanics.
  • Comparing days. Cboe publishes VIX1D history, so you can see whether today’s reading is high or low against recent sessions.

Common Mistakes

  • Using the wrong expiration. Only the option expiring today measures today.
  • Stale or wide quotes. Free quote pages can be delayed, and a stale straddle gives a stale range. Check the timestamp, use the midpoint, and be wary of very wide bid-ask spreads.
  • Treating the lines as a wall. Some sessions close outside the range. Plan for those days in advance, not when they happen.
  • Mixing units. The SPX range is in index points. SPY trades at roughly a tenth of SPX’s level and has its own options, so calculate its range from its own chain, in dollars.
  • Never re-marking. A 9:45 range is out of date by early afternoon.

FAQs

Is the expected move the same as the straddle price?

Not quite. The at-the-money straddle is close to the average-size move, which is about 0.8 of one standard deviation. Divide the straddle by 0.8 for a one-standard-deviation range, or use the straddle as is for a slightly narrower one. Just be consistent.

What time should I calculate it?

Once quotes have settled after the 9:30 a.m. ET open, and again around midday. On FOMC days, recheck shortly before 2:00 p.m. ET.

Can I use the VIX instead of VIX1D?

The VIX measures expected volatility over the next 30 days, so it’s a weaker guide to a single session than VIX1D or the same-day straddle. For the VIX’s own uses, see How to Use the VIX to Time Your SPX Options Trades.

Does the method work for SPY, QQQ or RUT?

Yes, using each one’s own option chain, as long as it has an expiration today. Check the chain first. The result is in that product’s own units.

Conclusion

Today’s expected move takes two inputs: the same-day at-the-money straddle (divided by 0.8) or VIX1D (scaled to the time left), plus the current SPX level. It gives you a range, not a direction. Re-mark it around midday, widen your expectations on event days, and treat the lines as a probability rather than a wall.

If you’d rather start from defined setups than a bare range, Base Membership sends daily setups on SPX, SPY, QQQ and RUT with defined entries and exits, and we publish every alert each week, misses included.

Educational content only, not investment advice. Options and futures trading involve substantial risk of loss and are not suitable for every investor. Blueville Capital LLC is not a registered broker or financial advisor.

Free weekly email

Every alert, every Friday

The Weekly Alert Report: every alert we sent that week, winners and losers, with the high each one reached.

Free. We’ll email a link to confirm your address. Unsubscribe anytime. Privacy policy

Keep reading

Clipboard checklist with a magnifying glass, notebook, books and a green chess king, representing checking a trading workshop before enrolling

Trading Education ·

Trading Workshop Guide: What to Look for Before You Enroll

Before you enroll in a trading workshop, know what the free session is selling, what the program costs in total, and how the FTC’s Cooling-Off Rule and your card dispute rights protect a purchase made at the event.

Base Membership

Choose how to pay

$295.95 per month. Cancel before your next billing cycle.

Before you continue

Educational content only

The information provided on this website and its associated messaging channels and emails is for educational purposes only. Blueville Capital LLC is not a registered broker or financial advisor. We do not offer personalized investment advice, and all content is intended to enhance your understanding of day trading concepts.

Visitors are strongly encouraged to consult with a qualified financial advisor to discuss their individual investment needs and strategies before making any financial decisions. By using this website, you acknowledge that you understand this disclaimer and agree to seek professional guidance tailored to your specific circumstances.

Read the full disclaimer